لوحة الغمر الفضية
شركة تصنيع وتجميع السبورة الفضية الغمرية - خدمة وقفة واحدة
خالي من الرصاص يستخدم على نطاق واسع لتلبية متطلبات صناعة الإلكترونيات للرصاص المعاقين. تتطلب المعالجة السطحية لثنائي الفينيل متعدد الكلور أيضًا استخدام الفضة الثقيلة الكيميائية كمعالجة سطحية خالية من الرصاص. مثل غمر السبورة الفضية. يعتبر الأداء المتفوق والتكلفة المعقولة هدية من السماء. إنها واحدة من أكثر العقود الآجلة الواعدة التي تحل محل HSAL والتكنولوجيا الجديدة من ENIG. لكن في الإنتاج الفعلي. تتميز ثخانة الفضة بالتقلبات التي لا يمكن تجنبها ، بحيث يمكن أن تسبب مشاكل موثوقية للوحة.
Silver-impregnated – all plates provide RoHS compliant surface treatment. This coating provides a very flat surface and a very reliable solder joint.
The production process of immersion silver PCB board is to remove oil→wash with water→micro-erosion →wash with water →impregnation→Immersion Silver →oxidation → wash with water→ horizontal drying
Why is PCB silver board oxidized?
There are many reasons for silver board oxidized oxidation, such as the storage environment. This is easy to be oxidized in high temperature, high humidity, or high pollution environment. It may also be caused by long storage time. It may also be caused by the lack of vacuum packaging, or the poor packaging, which leads to the oxidation of air after long contact.
Why do I have to wear sulfur-free gloves when touching silver plates?
In the process of inspection and handling, the silver plate must be separated from other objects with sulfur-free paper. The silver plate must be separated from the packaging bag with sulfur-free paper when the silver wire is discharged and the packaging must be completed within 8 hours.
It has a great affinity between silver and sulfur, silver when exposed to hydrogen sulfide gas or sulfur ions in the air is easy to generate an extremely difficult to dissolve silver halide (Ag2S) (the main component of silver halide is argentite), the chemical changes may occur in the case of very low, because silver sulfide is colored, so with the reaction intensified, silver sulfide increased thickening, o silver surface color and one by one step by white yellow grey or black.
إن دور الورق الخالي من الكبريت في صناعة
هو بدون الكبريت في لوحة الدوائر المطبوعة ، تقوم الشركة المصنعة لـ PCB بعمل وسادة من الورق الفضي تشنغ ، وتجنب تفاعل الفضة مع الكبريت في الهواء.
يتمثل الإجراء في تجنب تفاعل السلع النهائية في الطلاء الفضي مع الكبريت في الهواء ، بحيث تصبح المنتجات صفراء ، بسبب التفاعل بين المواد السيئة في أقرب وقت ممكن بعد استخدام المنتجات النهائية بدون منتجات الورق الكبريت ، ومنتجات التلامس يجب ارتداء قفازات خالية من الكبريت ، ولا يمكن أن تلامس سطح الطلاء
الأمور التي تحتاج إلى عناية في استخدام الألواح الفضية الغاطسة:
1. لا يمكن خبز Silverplate.
2. يتم إتمام لحام SMT والتدفق خلال 24 ساعة بعد فتح عبوة الفراغ.