Tablero rígido

Fabricante y ensamblaje de tableros rígidos: servicio integral

La placa rígida de PCB es un componente electrónico importante, soporte para componentes electrónicos y un portador para la conexión eléctrica de componentes electrónicos. La PCB incluye una placa rígida, una placa flexible y una placa rígida-flexible. Entre ellos, la PCB rígida es el tipo de PCB más común. Está hecho de sustrato rígido. Entonces no se puede doblar.

Common substrate types are paper base (FR-1, FR-2, FR-3). Epoxy fiberglass cloth base (FR-4, FR-5). Composite base (CEM-1, CEM-3). Metal base materials. Ceramic base materials. Thermoplastic substrates, etc. Currently, the most on the market Commonly used is FR4. Hard boards still dominate the PCB and are used in various electronic products.

Rigid-Flex-PCB-Board

Rigid board production process:

1. Cutting material: according to the requirements of the engineering data MI, cut into small pieces of production plates on large sheets. Small pieces of paper that meet customer requirements.

2. Drilling: according to the engineering data, the required aperture is drilled at the corresponding position on the sheet of the required size.

3. Copper sink: the copper is deposited by chemical deposition on the walls of the insulating holes.

4. Graphics transfer: the graphic transfer is the transfer of images on the production film to the board.

5. Graphic plating: graphic plating is to electroplate a layer of copper on the exposed copper skin or hole wall to the required thickness of the copper layer to the required thickness of gold or tin.

6. Unwinding: retreat the anti-plating coating layer with a NaOH solution to expose the non-line copper layer.

7. Etching: etching is the use of a chemical reaction method to corrode the copper layer in non-line parts.

Rigid PCB

So what else do we need to do next?

8. Solder mask: Transfers the pattern of ink and film to the board to protect the line. Also, when soldering parts, please prevent the tin on the line.

9. Character: characters are easy-to-identify markup.

10. Gold-plated fingers: to coat the plug finger with a layer of nickel gold of the required thickness to make it more wear-resistant.

11. Tin plate (a process of juxtaposition): Spray a layer of tin-lead spray tin (On the bare copper surface not covered with a solder resist oil) to protect the copper surface from oxidation and oxidation to ensure good soldering performance.

12 Forming: through the die stamping or CNC machine to cut out the shape-forming method required by the customer.
Note: The accuracy of the data board and the beer board is higher, and the handcuffs are second. The hand cutting board can only make some simple shapes.

13. Testing: through the electronic 100% test. It can detect open circuits, short circuits and other defects that are invisible to the naked eye.

14. Inspección final: mediante inspección 100% visual de los defectos de apariencia del tablero y reparación de defectos menores. Para evitar problemas y salida de placa defectuosa.

Investigación


    send-icon Envíanos tu mensaje