집> PCB 디자인 보드

PCB 디자인 보드

PCB 설계 보드 제조업체 및 조립 – 원 스톱 서비스

좋은 전자 프로젝트가 있지만 시작하는 방법을 모르는 경우 KINGFORD는 원하는 모든 서비스를 제공 할 수 있습니다. PCB 디자인 보드.

PCB는 모든 전자 제품의 기초입니다. PCB 디자인은 우리의 서비스에 매우 중요합니다. 첫째, KINGFORD 레이아웃 서비스가 무엇인지 공유 할 수 있도록 허용하십시오. 둘째, 우리가 당신을 위해 할 수있는 일 :

1. 새로운 PCB 엔지니어링 도면 생성

2. 새로운 회로도와 PCB 파일 구축

3. 빌드 된 BOM 목록

4. PCB 회로도 설계

PCB 치수 및 형식 설계
해당 구성 요소를 파일에 기록하십시오.
Routine then it connects all the component
Adjust all the component and wiring when finish routing
Save the document and output file

5. Make a report, include schematic’s netlist

6. Import schematic’s netlist to the PCB document

7. Design PCB (include layout and Copper pour etc)

Planning PCB
Set up the parameter of PCB
Import schematic’s netlist and B.O.M
Component distribution
Auto-routing
Adjust manually
Save the document and output file

8. Double-check via DRC

9. Make a final report – pcb design board

Please do a layout and wiring base on a schematic.
Please check the original document before layout, it can save something that can reuse (such as DDR and master chip), then break up the rest of the file and delete unnecessary line and hole.
Set up all the component’s location. The Master chip system set on the basis of every receiver port, pay attention to the direction and position.
Arrange all the function module by a single from the schematic, don’t take it together, then, arrangement outside PCB.
You can fine adjustment all the function module during the complete arrangement, make it achieve a reasonable connection between modules, finally, PCB layout uniform, beautiful and reasonable.
Please kindly consider the power supply when layout, It is necessary to plan which power sources are divided by planes and which are to be routed. The relevant power sources should be put together as much as possible, and a clear current flow should be made.

Circuit-Board

When you are the wiring, the first time needs to finish some important, several signal lines, such as DDR, HDMI, Network Port, TUNER, Panel, CA, USB, Audio and Video and so on. you can fine-tune the layout then get traces are as smooth as possible.