တရုတ်နိုင်ငံရှိ PCB Assembly စွန့်ပစ်ပစ္စည်းများကိုမည်သို့ဒီဇိုင်းနှင့်ပြန်လည်ပြုပြင်ရမည်နည်း။2020-02-05 အပေါ်တင်ခဲ့သည်
၁၀။ တရုတ်နိုင်ငံရှိ Pcb Assembly ထုတ်လုပ်မှုမှသင်လေ့လာနိုင်သောအံ့ဖွယ်အမှုများ
1.The recycling process for PCB assembly china
2.Application of MEMERCS to waste PCB assembly china boards
3.The calculation method of the new PCB assembly
4.Analysis of the metal resource of waste PCB assembly boards china
5. What are the steps involved in producing PCB?
6. What is schematic design?
7. How to create a netlist file?
8. How to learn the layout?
9.How to create a Gerber file?
10.Physical Creation of PCB assembly china
Pcb assembly china Pcb assembly china is has become the world’s largest producer of electronic parts. The amount of waste of household electric appliances and electronic devices are increasing increases worldwide. It is important to recycle useful substances from these.
However, it is economically and technically difficult to reuse all the substances. Furthermore, the environmental burden generated at the time of refining should be considered.
PCB assembly china recycling process and its environmental impact assessment
There are some pre procedures that pcb assembly manufactures are analyzing. Similarly, there are almost no indicators that take the viewpoint of resource depletion into consideration.
This article proposes an index MERMCS (Model for Evaluating Metal Recycling Efficiency for Complex Scraps). It considers various environmental viewpoints also. And uses it to evaluate the appropriateness of waste pcb assembly china boards. Especially; in developing countries. It is an evaluation of various recycling laws and consists of 8 chapters.
Chapter 1 is an introduction. It provides an overview of related research. Simultaneously, leading PCB assembly companies have already carried this research. Their main focus has remained the structure and recycling of PCB assembly china boards
Chapter 2 outlines the past research on metal elements. In addition, it contains the waste of printed circuit boards and their recycling. Similarly, it describes:
- Multi-criteria decision making
- life cycle evaluation methods
- describes the methods required for this article
The calculation method of the new PCB assembly
Chapter 3 describes the calculation method of the new pcb assembly china index MERMCS. It integrates an environmental impact assessment and resource depletion assessment by extra weighting.
In addition, we can use it to analyze the following points:
- amount of metal elements contained in waste printed circuit boards for
- desktop PCs and mobile phones
- the relevant indicators MRE (Material Recycling Efficiency)
- RRE (Resource Recovery Efficiency)
- QWERTY ( The differences from quotes for environmentally Weighted Recyclability)
- Characteristics of MEMRECS were described.
Chapter 4 describes some typical pcb assembly china
MEMRECS calculates data using its own developed policy. It also evaluates the different environmental impacts. As a result, although the absolute value differs depending on the inventory data used. The relative value between products shows similar features. It is necessary to select an environmental impact assessment index.
Application of MEMERCS to waste pcb assembly china boards
In Chapter 5 we will apply MEMERCS to waste pcb assembly china boards. This will apply on
- Mobile phones
As a result, when using QWERTY, there is almost no difference in the recycling method between the two companies. Similarly, when evaluated using MEMRECS, the results show that Umicore is superior. This is due to the fact that while Umicore effectively recycles tin.
According to the analysis, the importance of recycling tin is reflected in the results.
Chapter 6 describes the recycling of metal resources from waste pcb assembly boards in developing countries. In developing countries, printed circuit boards have been manually sorted, separated and recovered. However, it brings consideration of environmental impact.
မကြာသေးမီကကျွမ်းကျင်သူများသည်ကြေးနီကိုအဖိုးတန်ပစ္စည်းများအတွက်အသုံးပြုနေသည်။ ဤအခနျးတှငျ, ၎င်း၏ထိရောက်မှုကို MEMRECS သုံးပြီးအကဲဖြတ်ခဲ့သည်။
ရလဒ်အနေဖြင့်ပြန်လည်အသုံးပြုခြင်းသည်ရွှေ၏အာရုံစူးစိုက်မှုပေါ်တွင်မူတည်သည်။ ၎င်းကိုစွန့်ပစ်ထားသောပုံနှိပ်တိုက်နယ်မိုဘိုင်းဖုန်းများအတွက်အသုံးပြုသည်။ ထို့အပြင်၎င်းတွင်ရွှေများစွာပါ ၀ င်သည်။ သို့သော်ရွှေအာရုံစူးစိုက်မှုနည်းသော CRT TV များကဲ့သို့စွန့်ပစ်ထားသောပုံနှိပ်တိုက်နယ်ပျဉ်ပြားများသည်အဆင့်နိမ့်သည်။
ဤရလဒ်များကို အခြေခံ၍ သံဖြူကိုပြန်လည်ထုတ်ယူခြင်းလုပ်ငန်းစဉ်ကိုကျွန်ုပ်တို့အဆိုပြုထားသည်။ ဒါဟာစွန့်ပစ် pcb ပရိသတရုတ်၏လက်စွဲစာအုပ်သို့မဟုတ်စက်မှုကြိတ်ခွဲနိုင်ပါတယ်။ အလားတူပင်ရွှေ၏အာရုံစူးစိုက်မှုလည်းနိမ့်နိုင်ပါတယ်။
စွန့်ပစ် PCB တပ်ဆင်ပျဉ်ပြားတရုတ်၏သတ္တုအရင်းအမြစ်များ၏သုံးသပ်ချက်
အခန်း 7 သတ္တုအရင်းအမြစ်များအပေါ်ဇာတ်လမ်းခွဲခြမ်းစိတ်ဖြာကျင်းပ။ အထူးသဖြင့်တရုတ်နိုင်ငံတွင် MEMRECS ကို အသုံးပြု၍ စွန့်ပစ်ပစ္စည်း pcb တပ်ဆင်ရေးဘုတ်များမှပြန်လည်ထူထောင်ရေးအကဲဖြတ်မှု။ အကဲဖြတ်သုံးသပ်ချက် ၃ ခုသည်တရုတ်သို့တင်ပို့ခြင်းဖြစ်သည်။
- use of domestic copper smelters
- other metal smelting processes in Japan
The result was that exports to China were the worst. And recycling in Japan was transported to Japan. The largest rating is given even when considering the environmental load.
However, the recycling of waste printed circuit boards for mobile phones with high gold content in Vietnam has received almost the same evaluation.
Chapter 8 is the conclusion, summarizing chapters 1 to 7 and then giving the conclusions. In addition, it carries information about the need to consider sensitivity analysis of resource depletion data. It could not be investigated in this article:
- comparison with another objective
- multi-criteria decision-making methods
- application of MEMRECS to other than waste pcb assembly china
Q. What are the steps involved in producing PCB Assembly?
Steps in producing PCB assembly design:
There are different steps in producing PCB assembly design most of the designs began with a symmetrical illustration.
1: The hand-drawn design is used to test and make sure if it is working right.
2: The digital design of a hand-drawn design is created using the software.
3: Then cross-connection is created between electronic schematic and software.
Pcb board manufacturer uses it to create a physical pcb assembly. All devices are managed and arranged in the latest software that can design it. This software assists in cutting and drilling the pcb. Because alignment is crucial for the perfect lining. A designer should complete the whole procedure in designing.
- Manually designing and testing the prototype circuit.
- Capture the drawn illustration of the circuit using software
- Verify the working of the printed circuit board
- Do physical application using software
Q. What is the basic idea of PCB assembly china production?
The basic idea of developing and designing the printed circuit board is to enhance its performance according to modern equipment requirements.
Similarly, a designer selects specific components at the time while creating the PCB circuit. The next step is to verify the prototype.
PCB assembly is the substrate nearly of all electronic devices but often more convenient to build on a board designed for prototyping. Simultaneously, the schematic Capture software is also to boost the performance of a pcb in multitasking and heavy working.
Firstly rough skeletal schematic with specification was created. Then the important components are selected and all required parts were placed on board. In short, in the complete process, all devices and parts were placed adequately. As a result, both the layouts are way similar to each other.
Q. What is schematic design?
In this method, a PCB assembly china board manufacturer design all steps and techniques to manufacture a printed circuit board.
To complete the whole design, a pcb boar manufacturer should use the latest software.
It helps in telling the accurate steps to complete the pcb board schematic designing.
Q.What is the footprint?
Footprint placing tells the way to connect pads with pcb assembly board.
Q.How schematic Capture works?
It can easily capture the signals and enables the designer to export files. Furthermore, it also helps to connect all pcb boards layers. This method will increase the speed of pcb board manufacturing. Furthermore, it also generates a starting point automatically.
Q. How schematic Capture work? –PCB ညီလာခံ
The Opto sensor is the best tool to capture pcb board design. For the necessary parts, the existing part libraries search first. For every component, a part symbol is needed to drill or route in layout. Such as power connection. In this certain case, the power connector is required for the Opto sensor circuit.
The Opto sensor circuit is doesn’t show in the libraries. Thus power connector was created by practicing the method given in the tutorial. The whole artwork is wired together as in the paper schematic ad placed on the drawing area.
Q: How to create a netlist file? – PCB ညီလာခံ
A netlist file is the combination of all smaller and major pcb assembly board files. It contains every kind of information. In addition, it plays a role in the connector. You can easily transfer files and store data here. It stores information about every component. The most basic purpose of the netlist file is to carry the signal of connectivity among various parts of the pcb board.
Similarly, no one wants to create a populated pcb board. Generally, the printed circuit board is the hub of many small points. In the modern era, new techniques have shortened the size of printed circuit boards. Now nest files are the best option to make pcb board working faster. There is software that can be used for data compiling: CAM. But it is not as efficient as Netlist.
2. PCB Assembly Physical layout
An arrangement of pieces of equipment in several areas is called the physical design layout. It is a simple design that conveys info to build more locks. Pcb assembly china board manufacturer also calls it to blueprint technology. To complete this task, the latest 9.0 software has been used.
Q. What is Footprints in Layout?
Footprints are fundamental parts placed in pcb assembly board. It is used during board layout where an electronic component gets soldered onto the PCB. It consists of several layers of information, including copper land, silkscreen, solder mask, and solder paste. Similarly, it contains all the physical dimensions.
PCB Assembly Interconnect
Where the copper interconnects in the circuit will be located is defined by routing. On the surface of PCB interconnects are copper paths that connect one pin to another. Interconnects are also known as “routes or traces”
PCB Assembly Layers
A pcb assembly china board comes with multilayers. Similarly, you can find a single-layer printed circuit board also. It depends on what kind of board you prefer to buy. In the modern era, multi-layer boards are famous. In addition, pcb board တပ်ဆင်ခြင်း makers also use 4 layer pcb board mostly. It provides better chances to stand against heat. Furthermore, their life service is also impeccable.
A variety of tools will be used while working with layout. The curser will perform different actions depending on the currently activated tool. All the tools may be selected at the top of the screen from the menu slide.
T is a visible simple on the top of the bar. It is used for writing text. This allows add and edit the text. Drawing and editing such as outlines are done by obstacle tools. Editing of pin connections is done by connection tools. For editing and adding, routes Showed track Mode, Edit Segment Mode is used.
Q. How to learn layout?
Through layout, many items help arrow learning layout a tutorial explains the basics. The troubleshooting section on the appendix of the document help to search question helps arrow help topics on the menu bar. Popular Pcb assembly china manufacturers follow the same step
When starting most physical layout the first task is to create important footprints that are not on default libraries. Please refer to “How to create footprints in Or CAD layout” for instructions. Once you create all the necessary files, the process will begin.
With the obstacle tool, the correct size of the rectangle was drawn for the board outline. After drawing board outline the component were placed and aligned. The component tool was used to edit and move. All the comments then placed inside the outline with circulatory in between the sensor r were. Place on the left side and output b and c and power supply on another end, in Opto sensor circuit. Text and drill hole maybe edit to the board at that time.
Q. What is the Gerber File?
It is a 2d image binary file. It helps in developing images on the printed circuit boards. Now, pcb board assembly manufacturers use modern Gerber file equipment. It assists in shading better images. These images provide the good results by minimizing environmental noise.
Q. How to create a Gerber file?
You need to do basic settings for making Gerber files for different layers of the pcb assembly board.
There are the names of five Gerber files
- First layer
- End layer
- The top layer of silk material screen
- Separate layer for drilling
- Outer layer for board
PCB assembly board outline is on the Gerber file is on the Global layer by default which contains the board outlines. To change the location on the GND layer the solution is to double click on the board outline. Previous input data may erase except the five. “Gerber RS 274-D” uses by default. “Extended Gerber” is the proper device.
For each Gerber file, a three-letter name is used for a descriptive name. Using property window filename also be edited. By selecting “Preview” you can also preview the file. Select “Run Batch” to create a new file.
Physical Creation of PCB assembly china
To physically create a PCB assembly all the Gerber are files are available now. The prototyping machine uses to create a Gerber file.
To create a PCB substrate quick circuit 7000 along with a prototyping system in the ECE shop and then it is solder. The maximum board size is 13”x19”. It will take two days to complete the process.
Q. What are the last steps for verification of PCB assembly china?
The board needs to verify when returned. First, the visual inspection for connection and bridges. Then use the ohmmeter to verify the connections of traces. If it displays any malfunction, relevant PCB board professionals should start diagnostics procedures.