PCB LED

Fabricante e montagem de PCB de LED - serviço completo

A placa de PCB de LED é a parte mais importante da tela de LED. Se não houver placa PCB, o efeito de uso da tela de LED será afetado. A qualidade da placa PCB da tela LED. Também determina o efeito de exibição e a vida útil da tela de exibição de LED. De acordo com esta característica única, normalmente existem substratos de alumínio e placas de fibra de vidro usados ​​para fazer placas de LED atualmente.

The heat generated by the LED is conducted to the metal substrate through the insulating layer and then transmitted to the heat sink through the thermal interface material so that most of the heat generated by the LED is diffused into the surrounding air by convection. The printed circuit board is both the power supply carrier for the LED and the heat dissipation carrier for the LED, so the heat dissipation design of the heat sink and the printed circuit board is very important.

1500mm LED Doulbe Layer PCB2
Camada Doulbe LED 1500mm PCB2

LED PCB advantage:

Since the aluminum substrate has a good heat dissipation function, the product quality is mainly considered to be the material type, hardness, surface and thickness of the aluminum material, and the high power LED board has a relatively large heat generation, so most aluminum substrates are used for the LED lighting fixture. However, most aluminum substrate insulation layers have little thermal conductivity or even thermal conductivity, so that heat cannot be conducted from the LEDs to the heat sink (metal substrate), and the entire heat dissipation channel cannot be unblocked.

In this way, the thermal accumulation of the LED will quickly lead to LED failure. The aluminum substrate with a high thermal conductivity insulating layer solves this problem well. This ensures the lowest operating temperature, the brightest brightness and the longest life of the LED. Therefore, choosing an aluminum substrate with high thermal conductivity is critical for LEDs.

O FR-4 glass fiber circuit board is used on the led display. The FR-4 glass fiber circuit board is a traditional electronic product circuit board. It has a wide range of applications due to its good insulation, corrosion resistance, compression resistance, and multi-layer printing. FR-4 glass fiber circuit board is a relatively mature product. And many of the LED display screens are made of FR-4 glass fiber circuit board.

LED Long PCB

Inquérito


    send-icon Envie sua mensagem para nós