Kingford shton sistemin e zbulimit të rrezeve X dhe njohuritë lidhur me rrezet XPostuar më 2019-12-26
Duke uruar! Në mënyrë që t'u jepni klientëve me saktësi më të lartë dhe shërbime më të mira inspektimi, Kingford PCB shton një sistem inspektimi X-Ray viewX1800. Duke shpresuar të krijoni më shumë produkte me cilësi të lartë për klientët tanë dhe të siguroni që klientët të ndjehen më të qetë dhe të qetë të mendjes!
Si funksionon X - R ay ?
X-Ray is a high-performance detection device that uses a cathode ray tube to generate high-energy electrons to collide with a metal target. During the impact, the lost kinetic energy is released in the form of X-Ray due to sudden deceleration of electrons. For the position where the sample cannot be detected by the appearance, by using the change of the light intensity of the X-Ray after penetrating the different density substances, the contrast effect produced can form an image to display the internal structure of the object to be tested, and thus can be observing the problematic area inside the object to be tested while destroying the object to be tested.
Used for detection of defects and cracks in metal materials and parts, plastic materials and parts, electronic components, LED components, etc., internal displacement of BGA and circuit boards, and identification of empty welding, virtual welding, etc. BGA welding defects, microelectronic systems and sealing components, cables, fixtures, and internal analysis of plastic parts.
X-Ray Scope of application
- Automotive electronics
- BGA/QFN detection
- Aluminum die castings
- Molded plastic parts
- Electrical and mechanical components
- Biological agriculture seed
- Aviation component
- Tire wheel
- Harness / USB / plug
Why SCIENSCOPE View X1800?
1.Clear and undistorted image
Using the most advanced micro-focus spot X-ray tube & digital flat-panel detector, the latest upgraded image processing technology.
2.CNC step function & automatic detection and determination program
Greatly improve the detection capacity and reduce the labor cost
3.Detection screen center hold function
During tilt detection, the object to be detected is always at the center of the screen, and the magnification is always the same.
X-RAY detection technology has brought new changes to SMT production testing methods. It can be said that it is the most demanding manufacturer who is eager to further improve the SMT production process level, improve production quality, and will find circuit assembly failures in time. Good choice. With the development trend of SMT workshops, other assembly fault detection methods are difficult due to their limitations. X-RAY automatic inspection equipment will become the new focus of SMT production equipment and play an increasingly important role in the field of SMT production, as shown below.
1.Coverage of process defects is as high as 97%. Inspectable defects include: solder joints, bridging, soldering, insufficient solder, pores, device missing, and so on. In particular, X-RAY can also be inspected for solder joint hidden devices such as BGA and CSP.
2.Higher test coverage. The X-RAY inspection equipment in SMT can be inspected where it is not visible to the naked eye and online tests. For example, if PCBA is judged to be faulty, it is suspected that the inner layer of the PCB is broken, and X-RAY can be checked quickly.
3.The preparation time for testing is greatly reduced.
4.Defects that cannot be reliably detected by other test methods, such as: virtual soldering, air holes, and poor molding, can be observed.
5.Inspection equipment X-RAY requires only one inspection of double and multi-layer boards (with layering function)
6. Siguroni informacionin përkatës të matjes për të vlerësuar procesin e prodhimit në SMT. Të tilla si trashësia e ngjitësit të saldimit, sasia e lidhëses nën nyjet e bashkimit, etj.
7. Perspektiva e inspektimit me rreze X mund të shohë qartë strukturën tre-dimensionale të procesorit SoC dhe bordit rrethues të qarkut, veçanërisht perforimet periferike. Siguroni bazë të mjaftueshme nëse saldimi është në rregull ose saldim i rremë.
X-ray three-dimensional perspective imaging technology brings new changes to the electronic manufacturing quality inspection method. It is the best choice for manufacturers who further improve the production process level, improve production quality, and discover electronic assembly failures in time as a breakthrough. With the development trend of electronic packaging devices, other assembly fault detection methods are difficult due to their limitations. X-Ray three-dimensional imaging inspection equipment will become the new focus of electronic packaging device production equipment and play an irreplaceable role in its production field. effect.